,

Advance 1000+ Pure Sine Wave UPS

Advance Features:

KEY FEATURES

Zero Changeover Time from mains mode to battery mode. Perfect for running sensitive equipment like computers, printers, routers.

ATS with Artificial Intelligence regulates battery charging by constantly monitoring battery temperature.

Automatic By-Pass System (ABS), in case of UPS failure the ABS present helps to by-pass electricity to load so that un-interrupted power supply can be enjoyed.

Variable Current Charging that enables UPS to use batteries of any size depending on the required backup time. Ordinary UPS require at least a 150Ah battery to work even if you need less back-up time.

FEATURES

20KHz frequency design ensures noiseless operation of your UPS.
Built-in Galvanic Isolation Transformer for charging circuitry on mains.
Pure Sine Wave UPS with inbuilt battery charger.
ATS Technology.
Zero Switchover time – perfect for running sensitive equipment like computers, printers, servers, modems etc.
Standard Model 220V/50Hz (Models available on order basis: 110V/ 60Hz and 220V/60Hz).
6 Stage battery charging technology helps in increasing the battery life by providing healthy charging.
Suitable for countries with power fluctuations as it charges batteries at an optimal charging current even when voltage falls as low as 85V mains.
Low Voltage Disconnect (LVD): choosing the battery reserve higher than 10.5V i.e. 11V helps in recharging the battery fully and faster. It also acts like reserve power for emergency use with the help of DIP switch at the back panel.

 

Technical Specification
MODEL 1000/12V
VOLTAGE LIMITS NARROW WINDOW (UPS MODE)
Mains A.C. Low Cut 185 ± 10V
Mains A.C. Low Cut Recovery 190 ± I OV
Mains A.C. High Cut 265 ± I OV
Mains A.C. High Cut Recovery 260 ± 10V
VOLTAGE LIMITS WIDE WINDOW (W-UPS MODE)
Mains A.C. Low Cut 85 ± I OV
Mains A.C. Low Cut Recovery 90 ± I OV
Mains A.C. High Cut 290 ± I OV
Mains A.C. High Cut Recovery 275 ± I OV
OUTPUT PARAMETER
Mains Output Same as Input (45Hz-55Hz)
Output Frequency 50.0 Hz. ± 0.1 Hz
Output Voltage with Full Load 200V/220V ± I 5V
Waveform Sine Wave
Overload Above 100%
Short Circuit Protection >200% Load (Few msec)
BATTERY CHARGING
FLC based SMPS charging with soft start over full range of mains 85V to 290V ± I OV
Battery type SMF/TUBULAR/Flooded LEAD ACID/LI
Charging Current 15A/ I OA/5A/2.5A
Recommended Battery Capacity 150AH-200AH
Number of Batteries 1
TECHNOLOGY
Digital Signal Processor based state-of-the-art technology using MOSFETs
Fuzzy Logic Control Technology
ENVIRONMENT
Storage Temp. 0-55°C
Operating Temp. 0-55°C
Humidity 90% Non-condensing
Dimension (W X D X H) in mm 302 x 293 x 132
Weight Net (Kg) 8.250 Kg
Weight Gross (Kg) 8.750 Kg
Note : Specifications are subject to change without any prior notice.

Reviews

There are no reviews yet.

Be the first to review “Advance 1000+ Pure Sine Wave UPS”

Your email address will not be published. Required fields are marked *

Shopping Cart